Pyro Industries Quest Plus Instruções de Operação descarregar pdf (Página 24)

Mobile Home Installa tion

p*.

IN ADDITION TO THE STANDARD

INSTALLATION INSTRUCTIONS, THE

FOLLOWING INSTRUCTIONS MAY BE

REQUIRED

LOCAL, STATE OR FEDERAL

BUILDING CODES:

Stove must be permanently bolted to the floor.

Stove must have

permanent outside a

Stove must be permanently electrically

chassis of the home.

The

location selected

stove must be dedicated for this purpose.

Refer to page

for list of commonly used vent components.

NOTE: THE GROUNDING OF THIS PRODUCT, AT INSTALLATION,

MUST COMPLY

WITH NFPA-70 STANDARDS, CSA C22.1 IN CANADA,

AS WELL AS ANY LOCAL CODES.

WARNING:

DO NOT INSTALL IN A SPACE USED AS A BEDROOM.

I I

THE STRUCTURAL INTEGRITY OF THE MANUFACTURED

HOME FLOOR, WALL AND

CEILING/ROOF

MUST BE MAINTAINED.

MOBILE HOME EXHAUST VENT

PIPE

INSTALLATION GUIDELINES

Use only listed type

"L"

pellet vent pipe. Pipe

should extend at least

feet above the part of the

roof through which

passes. The top of the pipe

should be at least

feet above the highest required

elevation of any part of the mobile home within

feet of the pipe.

If exhaust vent exits the mobile home at a location

other than the roof, and exits at a point

feet or

less above the ground level on which the mobile

home

position a guard or method of enclosing

the pipe shall be provided at the point of exit for a

height of up to

feet. The openings, if any, in this

guard shall not allow a

314"

rod to pass through.

112''

rod could pass through but should not be able

to touch the pipe when inserted through the

opening a distance of

inches.

Sfeel Chassis of'

~ledrical Gound Noncombustible

Mobile Home to Chassis

floor Protedion

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Comentários a estes Manuais

Sem comentários

Pyro Industries Quest Plus Instruções de Operação Página 24

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Pyro Industries Quest Plus